Technical area

Ningbo Zhongding Plastic Co., Ltd.

Home

TECHNOLOGY

Technical area

Pc endurance plate (solid plate) wind and snow load bearing parameters

Technical parameters

Installation Method

Technical parameters

1. Product specifications

Product Category	Plate thickness (mm)	Length X Width (mm)	Color
			Transparent sapphire blue lake blue grass green milky white Red, etc.
Endurance plate	1.4~18 mm	2100 x 30000 1960 x 30000 1820 x 30000 1560 x 30000 1220 x 30000
Particle board	1.4~18 mm

Note: The above parameters are the general specifications of Zhongding Long sunshine board. In addition, the company can customize other specifications and color products according to user requirements.

2. Product performance
2.1 solid plate
(1). Basic parameters:

Project Name	Unit	Index value	Test Method (ASTM)
Specific Gravity	g/cm3	1.2	D-792
Impact strength (Izod, notch)	J/M	907	D-256
Tensile yield strength	Mpa	69	D-638
tensile breaking strength	Mpa	71
Elongation at yield	%	6.5
Elongation at break	%	120
Compression strength	Mpa	86	D-695
modulus of elasticity	Mpa	2400	D-638
Coefficient of thermal expansion	M/m·0C	6.7 × 10-5	D-696
Conducting coefficient	W/m · K	0.2	C- 177
Thermal deformation temperature (load 1.81MPa)	0C	135	D-648

(2). Light transmittance

Plate thickness (mm)	2.0	3.0	6.0	8.0	10.0
Colorless transparent plate (%)	99	88	83	82	80

2.2 solid plate
The material properties are the same as those of solid plates, except:
(1). Falling weight impact strength (ASTM D-3029 × Hammer head diameter Φ100mm)

Plate thickness (mm)	2.0	3.0	6.0	8.0	10.0
Colorless transparent plate (%)	99	88	83	82	80

(2). Light transmittance (ASTMD-1003)

Plate thickness (mm)	2.0	3.0	6.0	8.0	10.0
Colorless transparent plate (%)	99	88	83	82	80

(3). Sound insulation effect
6mm thick hollow plate, average attenuation 17dB(ISOR140)

(4). Combustion performance
Difficult to burn B1 GB50222-95

Some Performance Comparison of Several 2.3 Lighting Materials

Performance	Unit	organic glass	PC Board	PVC board	glass steel	Glass
Density	g/cm3	1.2	1.2	1.3-1.5	1.4-1.6	2.5
impact strength		Poor	very good	General	General	Very bad.
Continuous use temperature	0C	90	120	75	100	240
Visible Light Transmittance	%	82	88	80	86	90
Light transmission performance	Years later	very good	very good	Poor	Poor	very good
ultraviolet transmittance	%	40	0	0	20	80
combustion performance		Combustible	Hard to burn	Combustible	Combustible	non-combustible

3. Radius of curvature
Sunlight board has good toughness and can be cold bending characteristics, can be designed into a variety of arch structure, the radius must be greater than the limit radius of curvature of the sun plate. The following table gives the limit radius of curvature of some specifications of the sun board.
Ultimate curvature radius of 3.1 solid slab

Plate thickness mm	3	4	5	6	8
Limit radius mm	600	800	1000	1200	1600

According to customer needs, free to provide customers with design solutions